Gateway DX4320 Hardware Installation Manual page 49

7
If the new drive is a master (boot) drive, type
.
Number
- OR -
If the new drive is a slave drive, type
8
Press E . The
NTER
selected as the current fixed disk drive.
9
Type , then press E
1
opens.
10
Type , then press E
1
and your computer verifies the drive integrity.
11
Type , then press E
Y
letters changed or added
12
Press E . The
SC
13
Press E . FDISK closes.
SC
14
If you want to create an extended DOS partition, go to "Creating the
extended partition" on page 46.
- OR -
If you do not want to create an extended DOS partition, go to "Formatting
the New Drive" on page 50.
menu appears with the appropriate drive
FDISK Options
. The
Create DOS Partition
NTER
. The
Create Primary DOS Partition
NTER
. The message
NTER
appears.
menu opens.
FDISK Options
www.gateway.com
Partitioning the new drive
for the
1
Fixed hard drive
for the
2 Fixed hard drive Number
or
Logical DOS Drive
Primary DOS Partition created, drive
.
menu
screen appears
45