Table of Contents
Advertisement
2.1.2
2.1.2
Installing the cover
Installing the cover
2.1.2
2.1.2
2.1.2
Installing the cover
Installing the cover
Installing the cover
1.
Position the cover on top of the
chassis with the thumbscrews on
the rear, and leaving a gap of
about half an inch from the front
panel.
2.
Make sure that the side
markings on the cover (two on
each side) are aligned to the
grooves on the chassis.
3.
Slide the cover toward the front until it snaps in place.
4.
Tighten the thumbscrews on the rear to secure the cover.
A S U S A P 1 6 0 0 R - E 2 ( C S 3 )
A S U S A P 1 6 0 0 R - E 2 ( C S 3 )
A S U S A P 1 6 0 0 R - E 2 ( C S 3 )
A S U S A P 1 6 0 0 R - E 2 ( C S 3 )
A S U S A P 1 6 0 0 R - E 2 ( C S 3 )
T h u m b s c r e w s
T h u m b s c r e w s
T h u m b s c r e w s
T h u m b s c r e w s
T h u m b s c r e w s
S i d e m a r k i n g s
S i d e m a r k i n g s
S i d e m a r k i n g s
S i d e m a r k i n g s
S i d e m a r k i n g s
G r o o v e s
G r o o v e s
G r o o v e s
G r o o v e s
G r o o v e s
2 - 3
2 - 3
2 - 3
2 - 3
2 - 3
Advertisement
Table of Contents
