2.1
Chassis cover
2.1.1
2.1.1
Removing the cover
Removing the cover
2.1.1
2.1.1
2.1.1
Removing the cover
Removing the cover
Removing the cover
1.
Use a Phillips screwdriver to
remove the screw on each front
end of the top cover.
2.
Loosen the two thumbscrews on
the rear panel to release the top
cover from the chassis.
3.
Firmly hold the cover and slide it
toward the rear panel for about
half an inch until it is disengaged
from the chassis.
4.
Lift the cover from the chassis.
2 - 2
2 - 2
2 - 2
2 - 2
2 - 2
T h u m b s c r e w s
T h u m b s c r e w s
T h u m b s c r e w s
T h u m b s c r e w s
T h u m b s c r e w s
1 / 2 i n c h d i s t a n c e
1 / 2 i n c h d i s t a n c e
1 / 2 i n c h d i s t a n c e
1 / 2 i n c h d i s t a n c e
1 / 2 i n c h d i s t a n c e
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p