To install a fan or pair of system fans:
1.
Hold the plastic flap and position
the fan over a fan compartment.
Carefully insert the fan, or pair
of fans, until it fits in place.
2.
Connect the corresponding fan
cable from the connector on the
backplane board.
2 - 2 2
2 - 2 2
2 - 2 2
2 - 2 2
2 - 2 2
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p
C h a p t e r 2 : H a r d w a r e s e t u p