Installing The External Scsi Cable - Asus AP1600R-E2BA2 - AP - 1600R-E2 User Manual

2.6.2 2.6.2

Installing the external SCSI cable

Installing the external SCSI cable
2.6.2 2.6.2 2.6.2 Installing the external SCSI cable Installing the external SCSI cable Installing the external SCSI cable
To install the external SCSI cable:
1. Locate the SCSI-B connector on
the motherboard, and connect
one end (with the white tab) of
the SCSI cable.
2. Remove the two screws on the
other end (external SCSI port) of
the cable, and set them aside.
3. Insert the external SCSI port into
the slot opening on the rear
panel.
4. Secure the port with the two
screws that you removed earlier.
A S U S A P 1 6 0 0 R - E 2 ( C S 3 ) A S U S A P 1 6 0 0 R - E 2 ( C S 3 ) A S U S A P 1 6 0 0 R - E 2 ( C S 3 )
A S U S A P 1 6 0 0 R - E 2 ( C S 3 ) A S U S A P 1 6 0 0 R - E 2 ( C S 3 )
Pin 1
Screws
2 - 1 7 2 - 1 7 2 - 1 7
2 - 1 7 2 - 1 7