Symantec BRIGHTMAIL - SYM ANTISPAM AND Installation Manual page 45

Configuring Sendmail for the Brightmail Filter
Click add.
8
In the Filter Name field, type
9
In the Equates field, specify the filter address and any optional settings. The
10
following example is appropriate in most cases:
S=inet:port@machine.xyz.com, T=C:10m;S:1m;R:1m;E:10m
See "Understanding the Filter Address and Optional Settings," on page 33
information about the optional
The filter name and the filter executable name must be the same to
NOTE:
monitor it from the Service Control page.
Click apply to apply the filter.
11
Save your changes and deploy the configuration file.
12
.
bmifilter
failure setting and the
F=
Installation Guide
for
timeout setting.
T=
39