Setting The Phone; Setting The Phone Volume; Stopping Bluetooth Wave Transmission; Answering A Call Automatically - Pioneer F90BT - AVIC - Navigation System Operation Manual

Using hands-free phoning
3 Touch [OK].
Data on the selected item is cleared from this
navigation system's memory.
p If you do not want to clear memory that you
have selected, touch [Cancel].

Setting the phone

Setting the phone volume

The volume level related with the hands-free
phoning can be adjusted.
Touch [Phone Volume] on the "Phone
1
Menu".
= For details, refer to Displaying the Phone
Menu on page 52.
2 Adjust volume to touch the sliders of
[Phone Ringtone] and [Phone Voice].
[Phone Ringtone]:
This setting controls the incoming ring tone
volume.
[Phone Voice]:
This setting controls the incoming voice vo-
lume.
p Phone volume varies depending on the in-
coming caller's phone, volume setting and
other conditions.
= For details concerning operations, refer
to Answering an incoming call on page
56.
Stopping Bluetooth wave
transmission
You can stop transmission of electric waves by
turning off the Bluetooth function. If you do
not use the Bluetooth wireless technology, we
recommend selecting [Off].
Touch [Phone Settings] on the "Phone
1
Menu".
= For details, refer to Displaying the Phone
Menu on page 52.
2 Touch [Off] on [Bluetooth On/Off].
Touching [Bluetooth On/Off] switching be-
tween [On] and [Off].

Answering a call automatically

The navigation system automatically answers
an incoming call to the cellular phone. You
can answer a call while holding the steering
wheel while you are driving.
Touch [Phone Settings] on the "Phone
1
Menu".
= For details, refer to Displaying the Phone
Menu on page 52.
2 Touch any key next to [Auto Answer
Preference] (such as [Off], [After 3 seconds]
keys).
Auto Answer Preference selection appears.
3 Touch the item to configure.
[Off]: No automatic response. Respond manu-
ally
[Immediately]: Answers immediately
Chapter
08
61
En