Starting Voice Operation; Operating Ipod By Voice; Calling The Entry On "Contacts - Pioneer F90BT - AVIC - Navigation System Operation Manual

Chapter
26 Operating Your Navigation System with Voice

Starting voice operation

% Press MULTI-CONTROL on map screen
or the AV operation screen.
The voice operation screen appears.
If you lose your way...
You can listen to the brief operating instruc-
tion by touching
To cancel voice operation
You can cancel the voice operation feature at
any time by saying "Cancel". After you cancel
voice operations, the display returns to the
screen displayed before the voice operation
screen appeared.
p You can also cancel voice operation if you
touch on the voice operation screen, or
press MENU button or MAP button.
148
En
.

Operating iPod by voice

You can play music using voice operation from
the iPod connected to the navigation system.
p Playback of iPod movies is not available
using voice commands.
p To use the content/data on the iPod for
voice operation, transfer the data to this
system first.
= For details, refer to Acquiring/Cataloging
iPod music information on page 145.
Examples of voice operation of the iPod are
shown below. (A method for playing the album
title named "Pioneer" is described here, along
with an operational example.)
1 Press MULTI-CONTROL to start voice op-
eration.
Say "Change Source" to display the AV
2
source selection screen.
Say "iPod" on the selection screen to
3
switch the AV source to iPod.
p Touching the item on the screen also en-
ables you to select the desired AV source.
4 Press MULTI-CONTROL to start voice op-
eration.
Say "Play the album Pioneer" to play-
5
back the album name "Pioneer".
If the command is recognized properly, play-
back starts from the first song of "Pioneer".

Calling the entry on "Contacts"

A method for dialing the entry named "Nancy"
is described here along with an operational ex-
ample.
1 Press MULTI-CONTROL to start voice op-
eration.
Say "Call Nancy" to make a call.
2
Dialing starts.