RADIO RECEIVER UNIT (RRU)
PROCEDURE for HORIZONTAL INSTALLATION of the RRU
1.
Attach the mounting brackets to each side of the RRU, using the 4 Phillips Round Head
Screws (4mm x 8mm).
Phillips Head Screws (4mm x
8mm) used in 4 places
2.
Determine the mounting location and drill 4x 1/8" (4mm) mounting holes.
WARNING
Never mount the unit near the fuel tank.
NOTE:If mounting surface is carpeted, use caution when drilling holes to prevent drill bit from
catching on carpet. Cut holes in carpet before drilling into subsurface.
Mount the unit in place, using 4 Self-tapping Screws (5mm x 15mm), w/Flat Washers and
3.
Lock Washers. Use RTV (silicone sealer) on screw threads or around the holes to prevent
moisture intrusion.
Self-tapping Screw
(5mm x 15mm), w/Flat
Washers and Lockwashers
used in 4 places
Bracket
8
SYSTEM INSTALLATION
Bracket
4x 1/8" (4mm)
mounting holes
Carpet
RRU
Carpet