Table of Contents
Advertisement
4 Connect the cable from the V-Mount external battery
adaptor (IDX C-EB (XLR) to the
connector on the left side panel.
5 Insert the V-Mount battery into the V-Mount
external battery adaptor (IDX C-EB (XLR).
About the display
Adjusting the display angle
Pull the bottom of the display forward, as shown in the
following illustration, to allow the angle to be adjusted.
Push the bottom of the display (at the TASCAM logo) back
in to restore it to its flat position.
CAUTION
Do not push the display screen itself.
Adjusting the display and indicator brightness
EXT DC
IN
Turn the
key to adjust the brightness of the display, the
and
Push and turn the
the
display.
Cautions on the display
•
•
•
•
•
•
•
The display is produced with extremely high-precision
manufacturing technologies. More than 99.99% of the
pixels operate to specification. Less than 0.01% of the
pixels may occasionally misfire or appear as red or black
dots.
This has no effect on the recorded sound and does not
constitute a malfunction.
3 − Preparation
dial while pressing and holding the
DATA
PLAY [CALL]
keys and the
dial while pressing and holding
DATA
HOME
key to adjust only the brightness of the color
The display can easily be scratched, so do not use
pointed objects, including fingernail tips, to touch it.
Always touch it with your fingers.
Do not press the display forcefully with a finger or poke
it with a pen, toothpick or other pointed object. Doing so
could scratch the display or cause malfunction.
The display touch panel is comprised of a film and glass.
Do not apply a strong force to its surface. Doing so could
break the glass.
When using the display, do not put a hand on the panel
or push around the display forcefully. Doing so could
prevent accurate position detection.
Do not place anything on top of the display or otherwise
put weight on the same place for a long time. Doing
so could cause the panel to warp or result in inaccurate
position detection.
Do not apply a commercially available screen protection
film to the display. Doing so could prevent normal
operation.
Slightly wipe the display with a soft dry cloth that does
not shed dust (e.g. a cleaning cloth). Avoid wiping with a
stiff cloth or rubbing with force. Doing so could damage
the surface of the LCD. Do not use benzene, thinner,
manicure remover, alcohol or similar substances.
NOTE
HOME
PAUSE
,
REC
SLATE
indicator.
19
TASCAM HS-P82
Advertisement
Table of Contents
