Table of Contents
Advertisement
MANUAL MARK, TIME, OVER and UNLK marks. This is because
the total includes REC, END and PRE (when using prerecording)
marks that are always created during recording.
Erasing marks
1 Select the mark that you want to erase on the
screen or type of mark that you want to erase
LIST
on the
information screen.
MARK LIST
MARK LIST screen
MARK LIST information screen
2 Touch the
button.
DELETE
3 When a confirmation pop-up message appears, press
the
button or the
DATA
OK
marks.
Editing marks
1 Select the mark that you want to edit on the
screen.
LIST
7 – Mark and Locate Functions
MARK
dial to erase the mark or
MARK
2 Touch the
button to open the
Edit
Touch the
button to set whether or not
FRAME EDIT
the frame value can be edited. The first screen below
shows this option ON, and the second shows it OFF.
3 Touch a number button to edit a mark. Use the
dial to change the time for the selected number.
Press the
button to confirm the setting and
ENTER
return to the
MARK LIST
Touch the
button to reset the input values.
CLEAR
TIP
You can use a PS/2 keyboard to set these values. Press the
Enter key to confirm and press the ESC key to reset all the
digits to 0.
screen.
MARK EDIT
DATA
screen.
49
TASCAM HS-P82
Advertisement
Table of Contents
