Recovery Discs - HP Dx9000 - TouchSmart - 4 GB RAM Manual

7 Click Next at the next screen that prompts you
to do so.
8 Your computer restarts.
NOTE: If your system does not detect a recovery
partition, it will prompt you to insert a recovery disc.
9 In the Recovery Manager Welcome window, click the
Advanced options button.
10 Click Recover your computer to its original
factory condition, and then click Next.
11 If you are prompted to back up files, and you have
already done so, click No, and then click Next.
12 System recovery begins. After system recovery is
complete, the computer restarts.
13 Complete the registration process, and wait until you
see the desktop.
14 Turn off the computer, reconnect all peripheral devices,
and turn the computer back on.
15 Perform the procedure "Performing the post-recovery
procedure" on page 11.
System recovery at system
startup
If Windows Vista is not responding, but the computer is
working, use these steps to perform a system recovery:
NOTE: System Recovery deletes any data or programs
that you created or installed after purchase. Therefore,
ensure you have backed up to a removable disc any data
that you want to keep.
1 Turn off the computer. If necessary, press and hold the
On button until the computer turns off.
2 Disconnect all peripheral devices from the computer,
except the monitor, keyboard, and mouse.
3 Press the On button to turn on the computer.
4 As soon as you see the initial company logo screen
appear, repeatedly press the F11 key on your
keyboard until the Recovery Manager window opens.
5 Click Advanced options.
6 Click Recover your computer to its original
factory condition, and then click Next.
7 If you are prompted to back up files, and you have
already done so, click No, and then click Next.
8 System recovery begins. After system recovery is
complete, the computer restarts.
9 Complete the registration process, and wait until you
see the desktop.
10 Turn off the computer, reconnect all peripheral devices,
and turn the computer back on.
11 Perform the procedure "Performing the post-recovery
procedure" on page 11.
10
Starting system recovery from

recovery discs

This section contains the procedure for performing a
system recovery from the recovery discs you created as
described in "Creating Recovery Discs" on page 9.
NOTE: System Recovery deletes any data or programs
that you created or installed after purchase. Therefore,
ensure you have backed up to a removable disc any data
that you want to keep.
To perform a system recovery program using recovery
discs:
1 If the computer is working, create a backup CD or
DVD containing all the data files you want to save.
When you are done, remove the backup disc from the
disc slot.
CAUTION: All data on the hard disk drive will
be deleted. You will lose data if it is not
backed up.
2 Insert recovery disc #1 into the disc slot.
3 If the computer works, click the Windows Vista
start button, click the Arrow button next to the
Lock button, and then click Shut Down.
Or
If the computer is not responding, press and hold the
On button for approximately 5 seconds, or until the
computer turns off.
4 Disconnect all peripheral devices from the computer,
except the monitor, keyboard, and mouse.
5 Press the On button to turn on the computer.
6 A window may open, prompting you to choose
between running system recovery from the discs or
from your hard drive.
7 Choose to run from the recovery discs, and then
click Next.
8 In the Recovery Manager Welcome window, click the
Advanced options button.
9 Click Recover your computer to its original
factory condition, and then click Next.
10 If you are prompted to back up files, and you have
already done so, click No, and then click Next.
11 If you are prompted to insert the next recovery
disc, do so.
12 When the Recovery Manager is finished, remove the
last recovery disc.
13 Click Finish to restart the computer.