Obtaining, Saving Or Printing Diagnostic Test Information - Compaq Evo n1005v - Notebook PC Software Manual

Setup Utilities and Diagnostics
Obtaining, Saving or Printing Diagnostic Test
Information
1. Open Compaq Diagnostics by selecting Start > Control
Panel > Performance and Management > Compaq
Diagnostics.
2. Select the Test tab.
3. In the scroll box, select the category or device you want
to test.
4. Select a test type:
❏
❏
❏
5. Select a test mode:
❏
❏
6. Select the Begin Testing button.
4–8
Quick Test—Runs a quick, general test on each device in
a selected category.
Complete Test—Performs maximum testing on each
device in a selected category.
Custom Test—Performs maximum testing on a selected
device.
◆
To run all tests for your selected device, select the
Check All button.
◆
To run only the tests you select, select the Uncheck
All button, then select the check box for each test you
want to run.
Interactive Mode—Provides maximum control over the
testing process. You determine whether the test was
passed or failed and may be prompted to insert or remove
devices.
Unattended Mode—Does not display prompts. If errors
are found, they are displayed when testing is complete.
Software Guide