Obtaining, Saving, Or Printing Diagnostic; Test Information - Compaq 800 Series Maintenance And Service Manual

Troubleshooting

Obtaining, Saving, or Printing Diagnostic

Test Information

1. Access Compaq Diagnostics by selecting Start > Settings >
Control Panel > Compaq Diagnostics.
2. Select the Test tab.
3. In the scroll box, select the category or device you want to
test.
4. Select a test type:
❏
❏
❏
5. Select a test mode:
❏
❏
2–8
Quick Test—Runs a quick, general test on each device in
a selected category.
Complete Test—Performs maximum testing on each
device in a selected category.
Custom Test—Performs maximum testing on a selected
device.
◆
To run all tests for your selected device, select the
Check All button.
◆
To run only the tests you select, select the Uncheck
All button, then select the checkbox for each test you
want to run.
Interactive Mode—Provides maximum control over the
testing process. You determine whether the test was
passed or failed and may be prompted to insert or remove
devices.
Unattended Mode—Does not display prompts. If errors
are found, they are displayed when testing is complete.
Maintenance and Service Guide