Return To Default - HP dc72 - Blade Workstation Client Setup And Configuration Manual

Return to Default

Return to Default is also know as Unprovisioning.
An AMT set up and configured system can be unprovisioned using the AMT Configuration Screen and the
Un-Provision option.
Figure 10 Intel AMT Unprovisioning Screen
Select Un-Provision.
1.
a. Select Full Unprovision. Full unprovisioning is available for SMB mode provisioned systems.
This option returns all AMT Configuration settings to factory defaults, and does not reset ME
configuration settings or passwords. Full and Partial unprovisioning is available for Enterprise mode
provisioned systems. Partial unprovisioning returns all AMT configuration settings to factory defaults
with the exception of the PID and PPS. Partial unprovisioning does not reset ME configuration settings
or passwords.
An un-provisioning message displays after about one minute.
After unprovisioning completes, control is passed back to the AMT Configuration screen.
Provisioning Server, Set PID and PPS, and Set PRTC options are available again because the system is
set to the default Enterprise mode.
2. Select Return to previous menu.
Select Exit, and then select Y. The system reboots.
3.
23