Oem Tls-Psk - HP dc72 - Blade Workstation Client Setup And Configuration Manual

AMT Configuration must occur over a network. The network can be encrypted using Transport Layer Secu-
rity Pre-Shared Key (TLS-PSK) protocol. Once the systems connect to an S&CS, Enterprise mode Configura-
tion occurs.

OEM TLS-PSK

OEM TLS-PSK AMT set up and configuration occurs in two stages. The first stage is performed during
OEM manufacturing and the second stage at the customer location.
In the first stage, customers purchase systems from HP, which will AMT Setup those systems during manu-
facturing, bringing them to the In-Setup phase. The new Admin Password, PID, and PSS generated during
HP manufacturing are transferred to the customer in a separate and secured fashion. That information,
along with the new admin password, is provided to the customer. After manufacturing, the systems are
shipped to the customer in the In-Setup state.
Alternatively, the customer can provide HP with their own Administrator password, PID, and PPS to use for
the order, which HP will use to bring the systems into the In-Setup phase.
In the second stage, the customer receives the In-Setup systems and the PID, PPS, and password informa-
tion. The PID, PPS, and password information is integrated into the customer S&CS. The In-Setup systems
are then connected to the network and powered on. Enterprise Mode - AMT Configuration occurs. Some
ISV's may require additional settings, such as the SC&S port number and SC&S IP address. Contact your
Management Console ISV for more details.
During the second stage AMT Configuration, the S&CS will generate a new PID and PPS combination for
each of the systems and delete OEM PID/PPS from and Configuration Server database.
HP provides a fee-based customized service that will AMT Setup systems in the factory and securely pro-
vide pre-shared keys. HP offers a secured service that will eliminate manual AMT Setup of each unit at the
customer site. Contact HP for more information about this valuable service.
22