Operation; Name And Function Of Each Operation Panel Item - Brother LK3-B438E MKII Instruction Manual

5 . OPERATION

5 . OPERATION

5-1 . Name and function of each operation panel item

q
POWER
w
R E S E T
r
e
T E S T
t
BOBBIN.WIND
q POWER indicator .................. Illuminates when the power switch has been turned on.
w RESET switch ...................... . Press this switch to reset the machine when an error occurs.
e TEST switch ......................... Use this switch when you want to operate only the feed mechanism in order
r TEST indicator ...................... Illuminates when the TEST switch has been pressed.
t BOBBIN. WIND switch ......... Press this switch to wind the lower thread.
y SELECT switch ..................... Use this switch to select a menu (program number, X and Y feed, speed and
PROGRAM NO. indicator u
u PROGRAM NO. indicator ..... Illuminates when the SELECT switch y is pressed to shown the program
17
B430E
u
PROGRAM NO.
P
i
X - SCALE
o
Y - SCALE
!0
SPEED
!1
COUNTER
S E L E C T
y
to check a pattern.
counter). Each time the switch is pressed, one of the menu indicators (u to
!1 ) illuminates, and the setting for that menu item appears in the display !4 .
The illiminated indicator changes as follows each time the switch is pressed.
X-SCALE indicator i Y-SCALE indicator o
number setting.
LK3-B438E Mark II
Series
P1 P2
P3 P4
SPEED indicator !0 COUNTER indicator !1
!4