<1/2 反転モード>
<1/2 reverse mode>
例
Example
<1/4 反転モード>
<1/4 reverse mode>
例
Example
2-6. ディップスイッチの切り替え(KE-436B、436C)
2-6. Setting the DIP switch (KE-436B, 436C)
スタート
Start
反転
Reverse
0025Q
エンド
End
スタート
Start
反転
Reverse
反転
Reverse
0026Q
1086Q
KE-435C,436C
縫い模様の 1/2 で反転装置が動作します。
The inner clamping device operates at the 1/2-way mark
for the pattern being sewn.
memo-08
-
縫い模様の 1/4 と 3/4 で反転装置が動作します。
The inner clamping device operates at the 1/4-way and
3/4-way marks for the pattern being sewn.
memo-08
ON
(ご注意)
ディップスイッチの変更の際には、 必ず電源を切っ
てください。
ディップスイッチ A の No.6 を"ON"にします。
※ 反転装置を使用しないときは、ディップスイッチ A
の No.6 を"OFF"にしてください。
Note: Be sure to turn off the power before changing any
of the DIP switch settings.
Turn the selector No.6 on the DIP switch A to "ON".
* When the inner clamping device is not used, turn the
selector No.6 on the DIP switch to "OFF".
2. 取り付け方
2. INSTALLATION
12