Configuration Jumpers; Figure 4. Configuration Jumper Location; Table 2. Configuration Jumpers - Intel S5500HCV - Server Board Motherboard Service Manual

Server Board Features

Configuration Jumpers

Jumper Name Pins
CMOS Clear 1-2 (Default)
(J1E6)
2-3
ME Force Update 1-2 (Default)
(J1E2)
2-3
Password Clear 1-2 (Default)
(J1E4)
2-3
BIOS Recover 1-2 (Default)
(J1E5)
2-3
Intel® Server Board S5520HC and S5500HCV Service Guide

Figure 4. Configuration Jumper Location

Table 2. Configuration Jumpers

What happens at system reset...
Protect CMOS: These pins should have a jumper in place for normal system operation.
If pins 2-3 are connected for 5 to 10 seconds with AC power unplugged, the CMOS
settings clear on the next reset.
These pins should not be connected for normal operation.
ME Firmware Force Update Mode – Disabled
These pins should have a jumper in place for normal system operation.
ME Firmware Force Update Mode – Enabled
These pins should not be connected for normal operation.
Protect Password: These pins should have a jumper in place for normal system
operation.
To clear administrator and user passwords, power on the system with pins 2-3
connected. The administrator and user passwords clear in 5-10 seconds after power
on.
These pin should not be connected for normal system operation.
These pins should be connected for normal system operation.
The main system BIOS does not boot with pins 2-3 connected. The system only boots
16