NEC NP901W - WXGA LCD Projector Network Setup Manual page 33

5. Setting the LAN Setting of Personal Computer
13
Click [Use the following IP address], and input [IP address] and [Subnet mask].
• If, for example, the [IP address] and [Subnet mask] of the projector are set as show in "Example of
settings for projector" on page 30, set the personal computer as shown below.
• Example of setting the IP address and subnet mask.
IP Address
Subnet Mask
13
-1
14
Click [OK].
The "Wireless Network Connection Properties" window will be displayed.
15
Click [Close].
The "Wireless Network Connection Status" window will be displayed.
16
Click [Close].
The "Network and Sharing Center" window will be displayed.
17
Click the [X] in the top-right corner of the window.
The window will close.
This Completes the Ad Hoc connection of wireless LAN on the personal computer (Windows Vista).
Use each software program in User Supportware 5 to transmit the PC screen to the projector.
Projector ( page 30)
192.168.100.10
255.255.255.0
Click
([Example] Wireless LAN of Windows Vista: Ad Hoc connection)
Personal computer (Screen Below)
192.168.100.30
255.255.255.0
13
-2
14
Click
Click
33
5