NEC NP901W - WXGA LCD Projector Network Setup Manual page 32

5. Setting the LAN Setting of Personal Computer
7
When the screen shows "Successfully connected to NECPJ", check "M Save
this network" and click [Close].
"Set Network Location" window will be displayed.
Note
• Unless "M Save this network" is checked, the Remote Desktop function will not operate normally.
8
Click the location suited for the application (e.g., "Work").
9
If a screen is displayed that says "Successfully set network settings", click [Close].
The "Network and Sharing Center" window will be displayed.
10
Click [View status].
The "Wireless Network Connection Status" window will be displayed.
11
Click [Properties].
The "Wireless Network Connection Properties" window will be displayed.
12 From the list displayed in the center of the properties window, select (click)
[Internet Protocol Version 4 (TCP/IPv4)], and click [Properties].
32
11
Click
([Example] Wireless LAN of Windows Vista: Ad Hoc connection)
12
Click
-1
12
Click
-2