NEC NP901W - WXGA LCD Projector Network Setup Manual page 22

4. Setting the LAN Setting of Projector
5
Input "SUBNET MASK".
If "DHCP" is not checked, input the subnet mask of the network to which the projector is connected.
The method of inputting is the same as that of the "IP ADDRESS" field.
6
Input "GATEWAY".
If "DHCP" is not checked, input the default gateway of the network to which the projector is connected.
The method of inputting is the same as that of the "IP ADDRESS" field.
7
Input "DNS CONFIGURATION".
Set the IP address of the DNS server of the network to which the projector is connected.
The method of inputting is the same as that of the "IP ADDRESS" field.
Example of setting 1
8
Select "ADVANCED".
Set "CONNECTION" and "SECURITY" (encryption) specific to wireless LAN.
<1> Use the
SELECT /
the
The "ADVANCED" screen will be displayed.
22
button to highlight "ADVANCED" on the "WIRELESS" page and press
button.