NEC NP901W - WXGA LCD Projector Network Setup Manual page 2

Thank you for purchasing the NEC projector NP905/NP901W (hereafter referred to as the
"projector").
The projector is equipped with the following features so that you can give effective presentations.
• LAN port (RJ-45), USB Wireless LAN Unit, USB port (type A), supplied as standard
Windows Vista standard functions Network Projector and Remote Desktop can be used.
•
• Viewer that displays images from a USB memory device
*1 The projector is not supplied with a USB memory device.
The projector is also supplied with User Supportware 5 CD-ROM in which five programs of
software are stored for effective use of these features. The software stored on this CD-ROM are
as follows.
Each program runs on Windows Vista, Windows XP or Windows 2000.
Install in the PC the software in the User Supportware 5 CD-ROM before using.
• Image Express Utility 2.0
• Desktop Control Utility 1.0
• Ulead Photo Explorer 8.0 SE Basic
• Viewer PPT Converter 3.0
• PC Control Utility 3.0
This document explains how to configure the LAN settings to use the above software programs.
For details of operations, refer to "User Supportware 5 User's Guide" on User Supportware 5
CD-ROM and help function of the software.
When selecting WPA-PSK/WPA-EAP/WPA2-PSK/WPA2-EAP for wireless LAN security type,
refer to "WPA Setting Guide" on the User's Manual CD-ROM.
For the network settings on the personal computer, refer to the User's Manual for the personal
computer or the peripheral equipment for the network.
Use a wireless LAN card conforming to the Wi-Fi standard for your personal computer.
When using VT800:
The VT800 does not support wireless LAN. Connect it to a network via a wired LAN.
The VT800 does not come with a User Supportware 5 CD-ROM. Purchase the optional User
Supportware 5 CD-ROM to use the required software.
Software other than Ulead Photo Explorer 8.0 included in the above CD-ROM can be downloaded
from http://www.nec-pj.com/.
NOTES
(1) The contents of this guide may not be reprinted in part or whole without permission.
(2) The contents of this guide are subject to change without notice.
(3) Great care has been taken in the preparation of this guide; however, should you notice any
questionable points, errors or omissions, please contact us.
(4) Notwithstanding article (3), NEC will not be responsible for any claims on loss of profit or
other matters deemed to result from using the Projector.
(5) Guides with incorrect collating or missing pages will be replaced.
Introduction
*1