NEC NP901W - WXGA LCD Projector Network Setup Manual page 26

4. Setting the LAN Setting of Projector
16
Input "KEY 1" to "KEY 4" (only when WEP is selected).
If "WEP (64BIT)" or "WEP (128BIT)" is selected from "SECURITY TYPE", input an encryption key.
Set the same encryption key as the wireless access point and personal computer to be connected by
the wireless LAN.
Two types of keys can be input for SECURITY.
SECURITY TYPE
WEP (64 BIT)
WEP (128 BIT)
<1> Use the SELECT /
press the
The software keyboard will be displayed.
<2> Use the SELECT
button.
<3> Repeat step <2> above to input the encryption key.
The character will be input.
• Each button on the software keyboard has the following function.
• "MODE" ................. Selects uppercase, lowercase, or special characters.
• "SP" ....................... Inputs space.
• "BS" ....................... Deletes one character to the left of the character insertion position in
• " <<" " >>" ............... Move the character insertion position in the encryption key field to the
• "HEX" or "ASCII" .... Selects alphanumeric character input or hexadecimal number input.
• [OK] ....................... Finalizes the input character and closes the software keyboard.
• [CANCEL] .............. Cancels the input character and closes the software keyboard.
26
Alphanumeric Character
(ASCII)
5 characters
13 characters
button to select an item for which the encryption key is to be input and
button.
button, move the highlight to a character, and press the
the encryption key field.
left or the right.
• When "HEX" is displayed, alphanumeric characters (ASCII) can
be input.
• To input hexadecimal numbers, move the highlight to "HEX" and
press the
"HEX", and hexadecimal numbers can be input.
• When hexadecimal numbers can be input, "0x" is automatically
displayed at the beginning of the input field.
Hexadecimal Number
(HEX)
10 characters
26 characters
button. "ASCII" will be displayed instead of