NEC NP901W - WXGA LCD Projector Network Setup Manual page 25

13
Select "SECURITY" page (if necessary).
17
Proceed to step
SELECT /
<1> Use the
button to highlight the "SECURITY" tab.
The "SECURITY" page will be displayed.
14
Select "SECURITY TYPE".
Select whether SECURITY TYPE is performed or not.
To perform SECURITY TYPE, set an encryption key.
DISABLE
WEP(64BIT)
WEP(128BIT)
WPA-PSK/WPA-EAP/
WPA2-PSK/WPA2-EAP
15
Select "KEY SELECT" (only when WEP is selected).
If "WEP (64BIT)" or "WEP (128BIT)" is selected from "SECURITY TYPE", select which of the following
encryption keys, "KEY 1" to "KEY 4", is to be used.
if WEP, WPA-PSK, WPA-EAP, WPA2-PSK, or WPA2-EAP is not set.
button to select the "CONNECTION" tab, and press the
Encryption is not performed. There is a risk of transmitted data
being intercepted by a third party.
Encryption is performed using WEP with a 64-bit long secret key.
Encryption is performed using WEP with a 128-bit long secret key.
This offers enhanced security when compared to a 64-bit secret key.
More secure than WEP type. For setting details, refer to "WPA
Setting Guide" on the User's Manual CD-ROM.
4. Setting the LAN Setting of Projector
4
25