Lan Subsystem (Optional); Lan Subsystem Software; Rj-45 Lan Connector Leds; 10/100/1000 Gigabit Ethernet Lan Connector Leds - Intel D865GRH Manual

Intel Desktop Boards D865GRH Product Guide
Related Links
Go to the following link or sections in this manual for more information about:
•
Audio drivers and utilities,
•
Installing the front panel audio solution, page 39 in Chapter 2
•
Setting up the Flexible 6-Channel Audio with Jack Sensing, page 41 in Chapter 2

LAN Subsystem (Optional)

The optional LAN provides a Fast PCI LAN subsystem. The LAN subsystem provides the
following functions:
•
10/100/1000 Gigabit Ethernet LAN (Intel 825470EI)
•
Support for RJ-45 connector with status indicator LEDs
•
Programmable transit threshold
•
Configurable EEPROM that contains the MAC address

LAN Subsystem Software

For LAN software and drivers, refer to the D865GRH link on Intel's World Wide Web site at:
http://support.intel.com/support/motherboards/desktop

RJ-45 LAN Connector LEDs

Two LEDs are built into the RJ-45 LAN connector. Table 4 describes the LED states when the
board is powered up and the 10/100/1000 Gigabit Ethernet LAN subsystem is operating.
Table 4. RJ-45 10/100/1000 Gigabit Ethernet LAN Connector LEDs
LED Color LED State
Bi-color LED Off
Green
Yellow
Green Off
On (steady state)
On (brighter and
pulsing)
18
http://support.intel.com/support/motherboards/desktop/
Indicates
10 Mbit/sec data rate is selected.
100 Mbit/sec data rate is selected.
1 Gbit/sec data rate is selected.
LAN link is not established.
LAN link is established.
The computer is communicating with another computer on the
LAN.