Peripheral Configuration Submenu; Ide Configuration Submenu - Intel D845GVSR - Desktop Board Motherboard User Manual

Peripheral Configuration Submenu

Feature
Serial Port A
Parallel Port
Mode
Audio Device
LAN Device

IDE Configuration Submenu

Feature
IDE Controller
Primary IDE Master No options
Primary IDE Slave
Secondary
IDE Master
Secondary
IDE Slave
2-6
Using the BIOS Setup Program
Options Description
• Disabled Configures serial port A.
• Enabled Auto assigns the first free COM port, normally COM1, the address 3F8h,
• Auto and the interrupt IRQ4. An * (asterisk) displayed next to an address
indicates a conflict with another device.
• Disabled Configures the parallel port.
• Enabled Auto assigns LPT1 the address 378h and the interrupt IRQ7. An * (asterisk)
• Auto displayed next to an address indicates a conflict with another device.
• Output only Selects the mode for the parallel port. Not available if the parallel port is
• Bi-directional disabled.
• EPP Output Only operates in AT†-compatible mode. Bi-directional operates
• ECP in PS/2-compatible mode. EPP is Extended Parallel Port mode, a high-
speed bi-directional mode. ECP is Enhanced Capabilities Port mode, a
high-speed bidirectional mode.
• Disabled Enables or disables the onboard audio subsystem. For boards with no
• Enabled onboard audio subsystem, this option does not appear.
• Disabled Enables or disables the onboard LAN device. For boards with no
• Enabled onboard LAN subsystem, this option will not appear.
Options Description
• Disabled Specifies the integrated IDE controller.
• Primary Primary enables only the primary IDE controller. Secondary enables only
• Secondary the secondary IDE controller. Both enables both IDE controllers.
• Both
Reports type of connected IDE device. When selected, displays the
Primary IDE Master submenu.
No options Reports type of connected IDE device. When selected, displays the
Primary IDE Slave submenu.
No options Reports type of connected IDE device. When selected, displays the
Secondary IDE Master submenu.
No options Reports type of connected IDE device. When selected, displays the
Secondary IDE Slave submenu.