Ide Configuration Submenu - Intel D845GLLY Using Manual

Technical Product Specification for Intel Desktop Boards using the Intel 845GL Chipset

4.4.4 IDE Configuration Submenu

To access this submenu, select Advanced on the menu bar and then IDE Configuration.
Maintenance
The menu represented in Table 31 is used to configure IDE device options.
Table 31. IDE Configuration Submenu
Feature
IDE Controller
PCI IDE Bus Master
Hard Disk Pre-Delay
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
60
Main
Advanced
PCI Configuration
Boot Configuration
Peripheral Configuration
IDE Configuration
Diskette Configuration
Event Log Configuration
Video Configuration
USB Configuration
Chipset Configuration
Options
• Disabled
• Primary
• Secondary
• Both (default)
• Disabled
• Enabled (default)
• Disabled (default)
• 3 Seconds
• 6 Seconds
• 9 Seconds
• 12 Seconds
• 15 Seconds
• 21 Seconds
• 30 Seconds
Select to display sub-
menu
Select to display sub-
menu
Select to display sub-
menu
Select to display sub-
menu
Security Power
Description
Specifies the integrated IDE controller.
Primary enables only the primary IDE controller.
Secondary enables only the secondary IDE controller.
Both enables both IDE controllers.
Enables/disables the use of DMA for hard drive BIOS
INT13 reads and writes.
Specifies the hard disk drive pre-delay.
Reports type of connected IDE device.
Reports type of connected IDE device.
Reports type of connected IDE device.
Reports type of connected IDE device.
Boot Exit