Intel D845GLLY Using Manual page 59

Table 30. Peripheral Configuration Submenu (continued)
Feature
Interrupt
(This feature is displayed
only if Serial Port B is set
to Enabled.)
Parallel port
Mode
Base I/O address
(This feature is present
only when Parallel Port
is set to Enabled)
Interrupt
(This feature is present
only when Parallel Port
is set to Enabled)
DMA
(This feature is present
only when Parallel Port
Mode is set to ECP)
Audio Device
LAN Device
Options Description
• IRQ 3
Specifies the interrupt for serial port B, if serial port B is set to
(default) Enabled.
• IRQ 4
• Disabled
Configures the parallel port.
• Enabled
Auto assigns LPT1 the address 378h and the interrupt IRQ7.
• Auto (default)
An * (asterisk) displayed next to an address indicates a
conflict with another device.
• Output Only
Selects the mode for the parallel port. Not available if the
parallel port is disabled.
• Bi-directional
(default) Output Only operates in AT
• EPP
Bi-directional operates in PS/2-compatible mode.
• ECP
EPP is Extended Parallel Port mode, a high-speed
bi-directional mode.
ECP is Enhanced Capabilities Port mode, a high-speed bi-
directional mode.
• 378 (default)
Specifies the base I/O address for the parallel port.
• 278
• IRQ 5
Specifies the interrupt for the parallel port.
• IRQ 7
(default)
• 1
Specifies the DMA channel.
• 3 (default)
• Enabled
Enables or disables the onboard audio subsystem.
(default)
For boards with no onboard audio subsystem, this option
does not appear.
• Disabled
• Disabled
Enables or disables the onboard LAN device.
For boards with no onboard LAN subsystem, this option will
• Enabled
not appear.
(default)
BIOS Setup Program
†
-compatible mode.
59