Primary/Secondary Ide Master/Slave Submenus - Intel D845GEBV2 - Desktop Board Motherboard Product Manual

Intel Desktop Board D845GERG2/D845GEBV2 Product Guide

Primary/Secondary IDE Master/Slave Submenus

Maintenance
There are four IDE submenus: Primary master, primary slave, secondary master, and secondary
slave. Table 18 shows the format of these IDE submenus. For brevity, only one example
is shown.
Table 18.

Primary/Secondary IDE Master/Slave Submenus

Feature
Drive Installed
Type
Maximum Capacity None
LBA Mode Control
(Note)
Block Mode
PIO Mode
(Note)
DMA Mode
S.M.A.R.T.
Cable Detected
(Note)
Note: These configuration options appear only if an IDE device is installed.
52
Main Advanced
IDE Configuration
Options Description
None Displays the type of drive installed.
• Auto (default)
Specifies the IDE configuration mode for IDE devices.
• User
Auto fills-in capabilities from ATA/ATAPI device.
User allows capabilities to be changed.
Displays the capacity of the drive.
None Specifies LBA mode control.
• Disabled
Check the hard disk drive's specifications for optimum
• Auto (default)
setting.
• Auto (default)
Specifies the PIO mode.
• 0
• 1
• 2
• 3
• 4
• Auto (default)
Specifies the Ultra DMA mode for the drive.
• SWDMA 0
• SWDMA 1
• SWDMA 2
• MWDMA 0
• MWDMA 1
• MWDMA 2
• UDMA 0
• UDMA 1
• UDMA 2
• UDMA 3
• UDMA 4
• UDMA 5
• Auto (default)
Self-monitoring analysis and reporting technology.
• Disable
• Enable
None Displays the type of cable connected to the IDE interface:
40-conductor or 80-conductor (for ATA-66/100 devices).
Security Power
➜
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Boot Exit