Channel Set-Up - Sony Bravia KLV-32BX300 Operating Instructions Manual

Channel Set-up

1 Digit Direct
Auto Tuning
Programme Sorting
Programme Labels
Manual Programme
Preset
When "1 Digit Direct" is set to "On", you can select a channel using one preset number
button (0 - 9) on the remote.
• When "1 Digit Direct" is set to "On", you cannot select channel numbers 10 and above
entering next digit using the remote.
Tunes in all the available channels. This option allows you to retune the TV after moving
house, or to search for new channels that have been launched by broadcasters.
Changes the order in which the channels are stored on the TV.
F f
1
Press / to select the channel you want to move to a new position, then press
F f
2
Press / to select the new position for your channel, then press
Assigns a channel name of your choice up to seven letters or numbers.
F f
1
Press / to select the channel you want to name, then press
F f
2
Press / to select the desired letter or number ("_" for a blank space), then press
g
.
If you input a wrong character
G g
Press / to select the wrong character. Then, press
character.
To delete all the characters
Select "Reset", then press
3
Repeat the procedure in step 2 until the name is completed, then press
Before selecting "Label"/"AFT"/"Audio Filter"/"Skip"/"Colour System"/"Signal
Booster", press PROG +/– to select the programme number with the channel. You
cannot select a programme number that is set to "Skip" (page 24).
"Programme"/"TV System"/"VHF/UHF"
Presets programme channels manually.
1
Select "Programme", then press
F f
2
Press / to select the programme number you want to manually tune
(if tuning a VCR, select channel 0), then press RETURN.
F f
3
Press / to select "TV System", then press
F f
4
Press / to select your TV broadcast systems, then press
F f
5
Press / to go to the frequency range indication ("VHF Low", "VHF High" or
"UHF"), then press .
6
Tune the channels as follows:
G g
Press / to search for the next available channel. When a channel has been found,
the search will stop. To continue searching, press
Repeat the procedure above to preset other channels manually.
"Label"
Assigns a name of your choice, up to seven letters or numbers, to the selected channel.
To input characters:
F f
1
Press / to select the desired letter or number ("_" for a blank space), then press
g
.
If you input a wrong character
G g
Press / to select the wrong character. Then, press
character.
2
Repeat the procedure in step 1 until the name is completed, then press
"AFT"
Allows you to fine-tune the selected channel manually. When "On" is selected, the fine
tuning is performed automatically.
F
/
.
.
.
G g
/ .
F
.
.
f
to select the correct
.
.
f
/ to select the correct
.
Continued
23
.
GB