Set-Up - Sony Bravia KLV-32BX300 Operating Instructions Manual

Set-up

USB Auto Start
Favourites
Timer Settings
AV Set-up
Automatically enter photo thumbnail view when the TV is turned on and a digital still
camera or other device storing photo files is connected to the USB port then turned on.
Allows you to set your favourite channels and/or external input by assigning the desired
channel numbers and/or external input.
To watch a channel or external input
F f
Press / to select the channel number or external input, then press
To turn off the Favourite list
Press RETURN to return to the previous screen.
Add a current channel or external input to the Favourite list
F f
Press / to select "Add to Favourites", then press
• When you continue to add items beyond the 10th item, the bottom item in the list will be
automatically removed from the Favourite list.
Sets the timer to turn on/off the TV.
"Sleep Timer"
Sets the TV to automatically switch to standby mode after a certain amount of time.
z • If you turn off the TV and turn it on again, "Sleep Timer" is reset to "Off".
"On Timer"
Sets the TV to automatically turn on from standby mode.
"Clock Set"
Allows you to adjust the clock manually.
• "Clock Set" will automatically reset when you turn off the AC power.
• When the "Sleep Timer" or "On Timer" is activated, the
front panel lights up in amber.
"Video Labels"
Assigns a name to any equipment connected to the side and rear jacks. The name will
be displayed briefly on the screen when the equipment is selected.
F f
1
Press / to select the desired input source, then press
F f
2
Press / to select the desired option below, then press
Equipment labels: Uses one of the preset labels to assign a name to connected
equipment.
"Edit": Creates your own label. Follow steps 2 to 3 of "Programme Labels"
(page 23).
"Skip": Skips an unnecessary input source.
"Colour System"
Selects the colour system ("Auto", "PAL", "SECAM", "NTSC3.58", "NTSC4.43" or
"PAL60") according to the composite video signal from the input source.
"Video 1 Input/Output"
Switches the video jack
When set to "Output", outputs whatever is being viewed on the screen (except signals
from the / , HDMI IN 1 or 2 and
"Video 3/Component Input"
Select "Auto" to have the TV detect and switch between the component video jack
or the video jack 3 when component video jack
connected.
• You cannot use the component video jack
and audio jack between input and output modes.
1 1
/ PC IN jacks).
and the video jack
.
.
(Timer) indicator on the TV
.
.
or video jack 3 is
3 at the same time.
Continued
25
GB