HP D7171A - NetServer - LPr Configuration Manual page 2

Navigator version
Operating System
Service pack
SPU
Model
Clock speed
No. of CPUs
BIOS version
CPU cache
RAM
No. of power supplies
Local storage
I/O slots:
Storage
Local
Physical drive location
Disk drives
Controller
SCSI bus
Shared
Controller
Model
No. of controllers
Firmware
Driver
SPU I/O slot
SCSI ID
BIOS Configuration
options:
Cabinet
Model
Firmware Revision
No. of cabinets
Disk drives:
G.01.00 or later
Microsoft Windows NT Server 4.0, Enterprise Edition or later
SP3 and TCP/IP patches.
HP NetServer LXr Pro Model 1
200 MHz.
2 – 4 (at least 2 are required)
1.00.09CD0L or later
Any size
128 MB minimum. Must be HP.
3
Internal or external, using any controller. Must use HP disks. See
Storage below.
P4, [P5] – Adaptec AHA-2944UW SCSI controller
P2 – Public LAN Network Interface card
P1 – Private LAN Network Interface card (HP D5013A)
All others - Any other plug-in cards.
SPU internal drive bays or HP external drive cabinet (e.g., HP Rack
Storage/8)
Must be HP
SPU embedded controller or any controller (any number, manufacturer or
driver) in any available I/O slot. Certified configuration used embedded
SCSI B.
Any HP cables that meet SCSI specifications and any SCSI bus speed
Adaptec AHA-2944UW
Use with HP AutoRAID Model 12H (A3700 AZ) only.
1 - 2
v1.32.1
Aic78xx.sys (version 4.0 from Service Pack 3)
P4, [P5]
6, 7
Host Adapter SCSI Termination: Automatic
Reset SCSI Bus at IC Initialization: Disabled
Host Adapter BIOS: Disabled
HP AutoRAID Model 12H (A3700 AZ)
HP26 or HP32
1 - 2
Any supported AutoRAID disk
2
Local