HP D7171A - NetServer - LPr Installation Manual page 6

the Server Component installation.
41. At Information Screen, Do Not enter anything and click on Next.
42. At the Services screen, accept the default and click on Next.
43. At the Configuration screen, click on UserID and Password:
Enter USERID for UserID
Enter PASSWORD for Password
44. Click on File and Print Sharing Services and specify the Server name and Domain name.
45. Click on Network Adapters and Protocol Services, and load the NIC driver from the
Drivers Diskette you created from the HP NetServer Navigator CD and add the desired
Protocol.
46. Click on Install then click on OK.
47. Remove the NIC driver diskette, installation will continue until it is completed.
APPENDIX
This section provides additional information about HP NetServers and Disk Array Adapters used
with HP NetServers.
Table #1
NetServer #Ports
========= ======
LX 2
LS 2
LH Pro 2
LH II 2
LH 3 2
LH 4 2
LH 3000 2
" 1
LD Pro 1
LC 1
SCSI Chip Driver Name
========= ===========
AIC7880 AIC7870.ADD
AIC7870 AIC7870.ADD
AIC7880 AIC7870.ADD
AIC7880 AIC7870.ADD
SYM53c895 SYM8XX.ADD
SYM53c895 SYM8XX.ADD
SYM53c896 SYM_HI.ADD
AIC7880 (SE)* AIC7870.ADD
AIC7880 AIC7870.ADD
AIC7700 AIC7770.ADD
6