Overview; About This Guide; Additional Information; Verify Contents - HP D7171A - NetServer - LPr Upgrade Manual

200 mhz/1 mb processor board

Hide thumbs Also See for D7171A - NetServer - LPr:

Table of Contents

1 Overview

This guide describes the installation of the 200 MHz/1 MB Processor Board

Accessory Kit in HP NetServer LXr Pro8 systems. The processor board includes

two 200 MHz/1 MB CPU chips, on which two heat pipes are mounted for

efficient cooling.

Use this guide to install up to three additional processor boards in a system that

already has one 200 MHz/1MB processor board installed.

In addition to the installation instructions, this guide contains regulatory

information.

For other information about your HP NetServer LXr Pro8, refer to the HP

NetServer LXr Pro8 User Guide.

CAUTION

Do not remove the processor board from its bag until you are

ready to install it. Make sure the bag remains sealed. The

CPU chips are sensitive to humidity, so desiccant has been

packed in the bag containing the processor board. When the

processor board has been installed and the HP NetServer is

running, the chips are no longer sensitive to humidity.

Unpack the shipping box and verify that you received the contents listed on the

next page for the 200 MHz/1 MB Processor Board Accessory Kit. If anything is

missing or damaged, or if the bag around the processor board is not sealed, call

your reseller.

Table of Contents