Hp Netserver Software Required; Hp Autopilot Client Hardware Required - HP D6030A - NetServer - E50 Installation Manual

HP NetServer Software Required

Minimum server software requirements include:
HP NetServer Navigator CD-ROM (included with your server)
Network operating system server software, either
Novell NetWare network operating system server software v3.12, or v4.1
(including SMP, excluding SFT III)
OR
Microsoft Windows NT Server 3.51

HP AutoPilot Client Hardware Required

Minimum hardware requirements for the HP AutoPilot Client include:
A 486 computer, connected to the network
A VGA color monitor
4 MB of hard disk space
A CD-ROM drive in order to gain access to the HP NetServer AutoPilot and HP
Information Assistant software (located on the HP NetServer Navigator CD-ROM)
The CD-ROM drive you use for installation must be located either in your HP
AutoPilot client workstation, or it must be accessible via the network.
NOTE You can make floppy masters of the HP NetServer AutoPilot software using
the "Create Disks" option on the "HP Management Solutions" menu located
on the HP NetServer Navigator CD-ROM.
1 Introducing HP NetServer AutoPilot
11