Alarms List; Hp Autopilot Features - HP D6030A - NetServer - E50 Installation Manual

The HP AutoPilot Client notification advises that a change (in this case a notice of
"Capacity minor level") has occurred at an HP NetServer "SEATTLE". The date and
time of the alarm are also noted.
NOTE If you are experienced with network installations, see the preceding "Quick
Start" section for a brief outline of HP AutoPilot setup.

Alarms List

The table below lists the types of monitoring and alarm notifications that may be sent
to your HP AutoPilot Client.
Table 1. HP NetServer AutoPilot Monitor and Alarm Capabilities
Status and Alarm Capabilities
Server SCSI status
HP Disk System
Storage Capacity Planning
Server Network Cards

HP AutoPilot Features

Key features of HP NetServer AutoPilot include:
An easy-to-use, intuitive 'stoplight' interface
Problem identification, coupled with appropriate remedies
Centralized monitoring of multiple HP NetServers running either Novell NetWare
or Windows NT operating systems
Alarms to notify you of HP NetServer disk space capacity, network interface card
(NIC) status, SCSI adapter and device problems, and potential HP NetServer SCSI
hard disk problems
Multiple HP AutoPilot Client support. Data from monitored HP NetServers can be
directed to more than one workstation.
Automatic Server Restart (ASR) capabilities
1 Introducing HP NetServer AutoPilot
Description
Warns you of SCSI adapter and device problems
Warns you of predicted SCSI disk drive failures
Helps track a server's volume usage
Monitors PC LAN adapter card performance
statistics and notifies you if any threshold values
are exceeded
7