Stamina 15-9300 Owner's Manual page 9

ASSEMBLY INSTRUCTIONS
STEP 7
Attach the METER BRACKET(78) to the HANDLEBAR(2) with ROUND HEAD SCREWS(M5x0.8x10mm)
(60) and ARC WASHER(M5)(79).
STEP 8
Install two AA batteries into the METER(77), the batteries are not included. See page 13 for detailed
battery installation instructions. Slide the METER(77) onto the METER BRACKET(78).
STEP 9
Plug the SENSOR WIRE(76) into the connecting wire of the METER(77). Insert the sensor on the end
of the SENSOR WIRE(76) into the SENSOR CLIP(75). Find the MAGNET(74) on the FLYWHEEL(23),
adjust the position of the sensor so the gap between the sensor and the MAGNET(74) is 1/4" to 1/2" (5mm
to 10mm).
STEP 10
To avoid the sensor wires rub with the FLYWHEEL(23). Refer to detail drawing A. Use the enclosed
nylon tie to secure the sensor wires to the MAIN FRAME(1).
A.
Nylon Tie
9