Equipment Symbols - HP StorageWorks 2/32 - SAN Switch Installation Manual

About this Guide

Equipment Symbols

The following equipment symbols may be found on hardware discussed in this
document:
10
Any enclosed surface or area of the equipment marked with these
symbols indicates the presence of electrical shock hazards. Enclosed
area contains no operator serviceable parts.
WARNING: To reduce the risk to personal injury from electrical shock
hazards, do not open this enclosure.
Any RJ-45 receptacle marked with these symbols indicates a network
interface connection.
WARNING: To reduce the risk of electrical shock, fire, or damage to the
equipment, do not plug telephone or telecommunications connectors
into this receptacle.
Any surface or area of the equipment marked with these symbols
indicates the presence of a hot surface or hot component. Contact with
this surface could result in injury.
WARNING: To reduce the risk to personal injury from a hot component,
allow the surface to cool before touching.
Power supplies or systems marked with these symbols indicate the
presence of multiple sources of power.
WARNING: To reduce the risk to personal injury from electrical
shock, remove all power cords to completely disconnect power
from the power supplies and systems.
SAN Switch 2/32 Version 4.2.x Installation Guide