HP StorageWorks 2/32 - SAN Switch Installation Manual page 36

Installing the SAN Switch 2/32
Note:
EIA cabinets.
Figure 11: Installing the switch into a rack (HP 10000 series or comparable EIA
cabinet)
36
This step applies to both the HP 10000 series, System/e cabinet or comparable
Insert the switch into the rack and install two #10-32 x 1/2-inch Phillips
pan-head screws with captive star lock washers, one on each side. See
Figure 11 and Figure 12.
SAN Switch 2/32 Version 4.2.x Installation Guide