Version; Description; Update Recommendation; Supersedes - HP StorageWorks 1510i - Modular Smart Array Release Note

Version:

2.0

Description

MSA1510i Active/Active controller firmware version 2.0

Update recommendation

dual-controller.

Supersedes

Product models

HP StorageWorks 1510i Modular Smart Array (MSA1510i)

Devices supported

For a list of supported servers, hard drive storage enclosures, and other network components, navigate to
the MSA1510i QuickSpecs on the MSA family website: http://www.hp.com/go/msa.

Operating systems

• Microsoft Windows Server 2003 x86 SP2
• Microsoft Windows Server 2003 x64 SP2
• Microsoft Windows Server 2003 IA64 SP2
• VMware 3.0.x

Enhancements

• Added Active/Active controller support.
• Improved stability.
• Added support for hard drive firmware updates (requires HP Firmware Maintenance CD 8.0
or greater).
• Added the following Storage Management Utility (SMU) improvements:
• Added support for Firefox browser 2.0 or greater.
• Show static & dynamic route for storage ports.
• Add static routes.
• Allow for hard drive firmware updates.
• Added Disable controller command.
• Added the Show Tech_Support command to Diagnostics tab.
• Allow configuration for setting the preferred path (controller LUN ownership) on per LUN basis.
• Can now set system-level redundancy settings for preferred path.
• Display initiator login status and connection statistics.
• Added the following CLI command enhancements, limiting output display for the following
commands:
• show ip
• show arp
• show discovery
• show isn_server
• show acl_entry
• show target
• show portal
Recommended for all MSA1510i configurations, both single-controller and
All previous firmware versions.
HP StorageWorks 1510i Modular Smart Array firmware 2.0 release notes
3