A Specifications; Physical Specifications; Facility Requirements; Power Supply Specifications - HP SN3000B Reference Manual

A Specifications

This appendix provides switch specifications.

Physical specifications

Table 9 Physical specifications
Dimension
Height
Depth (without plenum)
Width (The slightly increased width requires a slim rail
rack mount kit for mounting.)
Weight (with two power supply and fan assemblies, and
no SFPs installed)
Weight (with one power supply and fan assembly, and no
SFPs installed)

Facility requirements

Table 10 Facility requirements
Dimension
Electrical
Thermal
Cabinet (rack mounted)
Use rack kits designed for the extra
width of the switch to mount in
standard cabinets/racks.

Power supply specifications

The power supplies are universal and operate worldwide without voltage jumpers or switches.
They meet IEC 61000-4-5 surge voltage requirements and support autoranging to accommodate
input voltages and line frequencies. Each power supply has built-in fans for cooling.
Table 1 1 HP SN6000B 16Gb FC Switch power supply specifications
Specification
Input voltage
Input frequency
46 Specifications
Value
1U or 4.3 cm (1.7 in)
44.3 cm (17.4 in)
43.8 cm (17.2 in)
9.2 kg (20.2 lb)
7.82 kg (17.25 lb)
Value
Adequate supply circuit, line fusing, and wire size, as specified by the electrical
rating on the switch nameplate
Circuit protected by a circuit breaker and grounded in accordance with local
electrical codes
See Table 1 1 (page 46) for complete power supply specifications.
Minimum airflow of 79.8 cubic m/hr (47 cubic ft/min) available in the
immediate vicinity of the switch
Ambient air temperature not exceeding 40°C (104°F) while the switch is
operating
1U in a 48.3 cm (19 in) cabinet
All equipment in cabinet grounded through a reliable branch circuit connection
Plenum installed to prevent overheating
Additional weight of switch not to exceed the cabinet's weight limits
Cabinet secured to ensure stability in case of unexpected movement
Values
Range: 85–264 VAC Auto-volt, Nominal: 100–240 VAC, 2.0 A, 47–63
Hz; switch autosenses input voltage
Range: 47–63 Hz; Nominal: 50–60 Hz