Specify Number Of Volumes For Initial Copy, Resync - HP StorageWorks P9000 User Manual

6. In the M-R Path box, define the logical path between local and remote systems:
1. In the Port column, select a local system initiator port.
2. In the Pair-Port column, select the remote system RCU target port. This establishes a logical
path with the selected initiator port.
You may enter port numbers using the keyboard. You may abbreviate the number into
two characters. For example, "1A" may be entered instead of "CL1-A". Letters may be
uppercase or lowercase.
7. Click Set and close the Add Path dialog box.
8. See the Preview list to check the settings that you have made.
If you want to modify a setting, select and right click the setting in the Preview list and
then select Modify.
If you want to cancel a setting, select and right click the setting and then select Cancel.
9. Click Apply to apply the settings. If an error occurs, the error code appears in the rightmost
column of the Preview list. To view detailed information about the error, right click the error
code and select Error Detail.

Specify number of volumes for initial copy, resync

You can specify the number of volumes to be copied concurrently during an initial copy and
resynchronization operations.
Specify number of volumes for initial copy, resync 61