History Window Notes; Export Operations History; Optional Operation Window - HP StorageWorks P9000 User Manual

Operation Displayed
Status Change to Hold
Status Change by MCU(Suspend to Pending)
Unknown

History window notes

The operation rows may not appear in chronological descending order. To sort the information
in descending (or ascending) order, click a heading.
The history file always contains the most recent operations up to a maximum of 524,288
operations. Information older than seven days is not shown.
If a failure occurred with two or more pairs at the same time, the number of pairs showing
Suspend Pair(Failure) or Ready for Delta resync(Failure) may not match the actual number of
pairs in which the failure occurs.
The copy time might not be shown in the Copy Time column, even though Add Pair Complete
or Resume Pair Complete is shown in the Operation column. In such case, you can review the
copy time in the volume list in the Pair Operation window

Export operations history

Use the History window Export function to save operation history to a CSV file.
The following is an example of an exported text file.
2007/02/22 09:57:54,Paircreate Complete,01,01,00:02:01,00:02:04,--,000:01:08
2007/02/22 09:56:46,Paircreate Start,01,01,00:02:01,00:02:04,--,
2007/02/22 09:56:46,Pair definition,01,01,00:02:01,00:02:04,--,
(1)
(1) Data and time when the operation finished.
(2) Operation.
(3) Journal number
(4) Mirror ID
(5) LDKC number, CU number and LDEV number of the volume in the local storage system (LDKC : CU : LDEV).
(6) LDKC number, CU number and LDEV number of the volume in the remote storage system (LDKC : CU : LDEV).
(7) Extended consistency group number (used only with Continuous Access Journal Z). If no EXCTG, hyphens (--) display.
(8) Time taken for copying (from the start to the end of copying). Time is provided only when the operation (see (2))
is Paircreate Complete or Pairresync Complete

Optional Operation window

This window lets you change the number of volumes on which the initial copy operation is performed
concurrently.
Information on the Optional Operation window will be updated when you do one of the following:
Click Apply.
Select another tab and then reselect the Optional Operation tab.
188 Continuous Access Journal Z GUI reference
Description
The status of the S-VOL was changed to Hold because of a delta
resync operation.
The status of the pair was changed from Suspend to Pending
because of an operation from the primary system.
The storage system could not identify the type of the operation.
(2) (3) (4) (5) (6) (7) (8)