Createsnmptraptarget - HP P4000 User Manual

createSnmpTrapTarget

This command creates an SNMP Trap Target. The Community String must be the same
for all Trap Targets. If no Trap Targets exists, the Community String is used, otherwise
it is ignored and the Community String of existing Trap Targets is used.
Availability: Windows, SAN/iQ
Required Parameters:
login
The IP address or DNS-resolvable names of one or more storage systems
userName
The authentication user name for the group
passWord
The password for the group
keyFile
The encrypted key file (this is specified instead of the username and password parameters)
ipAddress
The IP Address of the target.
version
The SNMP Version.
1 - Version 1
2 - Version 2
3 - Version 3
communityString
The SNMP Trap Target community string
Optional Parameters:
none
Example Command:
cliq createSnmpTrapTarget login=10.0.1.3 userName=admin passWord=secret
ipAddress=10.0.10.25 version=1 communitystring=TrapString
50