HP P4000 User Manual page 122

Command-line interface
Hide thumbs Also See for P4000:
Table of Contents

Advertisement

The number of parity storage systems for the data on this volume. This enables parity network
RAID on the volume. Replication and parity are supported in the following combinations:
replication:1, parity:0 Network RAID-0 (None)
replication:2, parity:0 Network RAID-10 (2-way Mirror)
replication:3, parity:0 Network RAID-10+1 (3-way Mirror)
replication:4, parity:0 Network RAID-10+2 (4-way Mirror)
replication:2, parity:1 Network RAID-5 (Single parity)
replication:3, parity:2 Network RAID-6 (Dual Parity)
thinProvision
0 - The volume is not thin-provisioned
1 - The volume is thin-provisioned (in a thinly provisioned volume, reserve may be < length)
initialQuota
The initial quota for the volume, as a percentage or size - the volume resets to this initial size
when a snapshot is taken
reserveQuota
The reserve quota for the volume, as a percentage or size - this is the size guaranteed to be
available for this volume, regardless of space allocated to other objects in the system
scratchQuota
The scratch quota for the volume, as a percentage or size - this is the size guaranteed to be
available for snapshots of this volume, regardless of space allocated to other objects in the
system
mountPoint
The drive letter or mount point on the host for the volume (LUN will be uninitialized if not
specified)
stridePages
This is the initial stride setting for the volume - this must be a power of 2 (1,2,4,8)
namePrefix
A prefix string for newly created objects. A unique number value will be concatenated to this
prefix to guarantee name uniqueness.
vipLoadBalance
Use VIP load balancing for this host. This can be one of:
0
1 - default
WARNING: Using an initialQuota or stridePages value other the the default may impact
application server performance. minReplication values of 3 and 4 are experimental
and have not been fully regression tested. Use at your own risk.
Example Command:
cliq provisionVolume clusterName=TheCluster volumeName=TheVolume
description=NewVolume size=100GB mountPoint=z: login=10.0.1.2 userName=admin
passWord=secret
122

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storevirtual 4000San/iq

Table of Contents