Modifyvolume - HP P4000 User Manual

modifyVolume

This command modifies volume settings.
Availability: Windows, SAN/iQ
Required Parameters:
login
The IP address or DNS-resolvable names of one or more storage systems
userName
The authentication user name for the group
passWord
The password for the group
keyFile
The encrypted key file (this is specified instead of the username and password parameters)
volumeName
The name of the volume to modify
Optional Parameters:
description
A description for the volume created
replication
The replication level for the volume (1|2|3|4)
minReplication
The minimum replication allowed for the volume before it goes offline (1|2|3|4). Note: the
minReplication value must be equal to or less than the replication value on the volume.
parity
The number of parity storage systems for the data on this volume. This enables parity network
RAID on the volume. Replication and parity are supported in the following combinations:
replication:1, parity:0 Network RAID-0 (None)
replication:2, parity:0 Network RAID-10 (2-way Mirror)
replication:3, parity:0 Network RAID-10+1 (3-way Mirror)
replication:4, parity:0 Network RAID-10+2 (4-way Mirror)
replication:2, parity:1 Network RAID-5 (Single parity)
replication:3, parity:2 Network RAID-6 (Dual Parity)
thinProvision
119