Createcluster - HP P4000 User Manual

createCluster

This command creates a cluster in a management group.
Availability: Windows, SAN/iQ
Required Parameters:
login
The IP address or DNS-resolvable names of one or more storage systems
userName
The authentication user name for the group
passWord
The password for the group
keyFile
The encrypted key file (this is specified instead of the username and password parameters)
clusterName
The name of the cluster
node
The host names of the storage systems the cluster comprises
Optional Parameters:
description
Optional description for the cluster
useVip
Should virtual IP (VIP) addressing be used? This can be one of:
0
1 - default, if one or more VIPs are specified
vip
A delimited list of virtual IP address and subnet mask
Note: since each VIP contains two parameters, IP address and subnet mask, both must
be specified in order, even if empty
Example Command:
cliq createCluster login=10.0.1.3 userName=admin passWord=secret
clusterName=TheCluster description="My shiny new cluster" useVip=1 node=10.1.2.4
vip=10.1.2.99;255.255.0.0;;150.215.017.009;255.255.240.0;
34