Createremoteassociation - HP P4000 User Manual

createRemoteAssociation

This command creates a remote group-to-primary group association. This association
is done automatically when a remote snapshot is created, so this command is not
usually needed.
Availability: Windows, SAN/iQ
Required Parameters:
login
The IP address or DNS-resolvable names of one or more storage systems
userName
The authentication user name for the group
passWord
The password for the group
keyFile
The encrypted key file (this is specified instead of the username and password parameters)
remote
The IP address or DNS-resolvable names of one or more remote storage system
remoteUserName
The authentication user name for the remote group
remotePassWord
The password for the remote group
remoteKeyFile
The encrypted key file for the remote group (this is specified instead of the remoteusername and
remotepassword parameters)
primaryBandwidth
The remote copy bandwidth to the primary group (this is at the group level)
<n>Kb - Kilobits/sec (1000 Bits/second)
<n>Mb - Megabits/sec (1000 Kilobits/second)
<n>Gb - Gigabits/sec (1000 Megabits/second)
remoteBandwidth
The remote copy bandwidth to the remote group (this is at the group level)
<n>Kb - Kilobits/sec (1000 Bits/second)
<n>Mb - Megabits/sec (1000 Kilobits/second)
<n>Gb - Gigabits/sec (1000 Megabits/second)
39