Oki OKIPAGE14i Manual page 273

them.
5. Install the new image drum in the printer, inserting the alignment pins on
each end into the slots in the printer.
6. Remove the new toner cartridge from its package and shake it from side
to side a few times to distribute the toner evenly.
Caution! Use of toner that does not have the low melting feature required
by these printers can cause potential malfunction or premature failure of
the printer. Be sure to use only genuine OKI toner cartridges, Type 8,
OKI P/N 41331701.
7. Carefully peel off the tape from the bottom of the cartridge.
8. Place left end of the toner cartridge into the toner well at an angle, aligning
the recess in the end of the toner cartridge with the tab on the image
273